Pressure resistance strength 470N/mm2 Density 8.8g/cm3 |
Coefficient of heat conduction 58W/m.K Linear expansion coefficient 18.5x10/k |
Alloy hardness 90-120HB Elongation 40% |
Alloy material CuSn8P |
The product is improved from 090.The hole is arranged on the surface according to certain angle and density. It can delay life, low lubricating frequency and decrease wear, etc.
Pressure resistance strength 470N/mm² Density 8.8g/cm³
Coefficient of heat conduction 58W/m.K Linear expansion coefficient 18.5×10 /k
Alloy hardness 90~120HB Elongation 40%
Alloy material CuSn8P
The advantages of FB090 series products are:
1. Saving large amount of bronze material and save the working hours normally spent for lathing the bronze bushing.
2. Compared with lathed bushings and roller bearings, it is lights and more cost-effective.
3. Various holes and dents can be made on the frication surface for grease storage, prolonging the lubrication interval to 5 times as long as required by the bronze bushing.
4. Extremely high load sustainability, especially suitable for coarse abrasion surfaces.
Standaed products available: Straight bushings, thrust plates and pressure bearings.
Non-standard products available: Straight bushings, thrust plates, planks, bearing bushings, slide plates and steel bushing assembly.
FB090 Series bearings are widely used in applications sush as agricultural machineries, construction machineries, engineering machineries and automobile industry.